Neuson Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
EZ 17 13.4 1.7 39.6 ER 50 4 4
ET 18 13.4 1.8 73 ER 50 4 4
ET 20 13.4 2.0 73 ER 50 4 4
ET 24 13.4 2.2 78 ER 50 4 4
803 13.7 0.9 2x11.4 - - -
EZ 28 15.2 2.7 89.4 ER 50 4 4
1404 17.9 1.5 34.5 ER 50 2 -
1503 17.9 1.7 2x23.9 + 19.1 + 6.5 ER 50 1 3
1903 17.9 1.9 2x23.9 + 19.1 + 6.5 ER 50 1 3
2203 17.9 2.0 2x23.9 + 6.5 ER 50 1 3
EZ 38 21 3.8 117.6 ER 100 3 3
2503 27.1 2.6 2x28.5 + 19 ER 50 2 4
3003 27.1 3.1 2x39.3 + 28.2 ER 50 2 4
        ER 100 1 3
3003 Vario 27.1 3.4 2x39.3 + 28.2 ER 50 2 4
        ER 100 1 4
38 Z3 27.1 3.6 2x40 + 26.3 + 11.3 ER 50 4 4
        ER 100 2 3
50 Z3 28.1 5.3 2x57 + 41.4 + 11.7 ER 100 4  4
3703 35.4 3.7 2x44.5 + 26.1 ER 50 4 4
        ER 100 3 4
3503 Vario 35.4 3.8 2x44.5 + 25.1 ER 50 4 4
        ER 100 4 4
ET 65 36.2 6.6 144 ER 100 4 4
75 Z3 43.7 7.8 2x73.3 + 62.7 ER 250 4 4
6503 51.1 5.8 2x64.1 + 48 + 10.3 ER 100 4 4
6003 51.1 5.8 2x64.1 + 48 + 10.3 ER 100 4 4
8003 Vario 51.1 8.2 2x82.4 + 2x36.6 ER 250 4 4
ET 145 55 15.2   ER 600 1 1
ET 90 55.4 8.9 175.8 ER 250 4 4
12002 Vario 74 12.2 2x118 + 21.5 ER 250 4 4
        ER 600 1 2
12002 74 12.2 2x118 + 51.5 ER 250 4 4
        ER 600 1 2
Wheeled Excavators
EW 65 36.2 7.2 229.5 ER 250 4 4
EW 100 86 10.0 180 ER 250 4 4
        ER 600 1 1

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.