ER 600 L drum cutter

Pile head cutting

What is pile head cutting?

We speak of pile head cutting, when we cut off pile caps or screw piles, so that the rebar is revealed.

Examples

ER 250-4 L drum cutter on a Komatsu PC 80 excavator. Exposing pile heads

ER 250 L – Komatsu PC 80

Exposing pile heads

ER 600 L drum cutter on a Hyundai R 220 excavator. Exposing rebar cages

ER 600 L – Hyundai R 220

Exposing rebar cages

Exposing pile heads Pile heads Diameter: 1.5 m Length: 1.5 m Cutting performance Per pile: approx. 1 hour Round attack picks Type: ER 15/46/38/22 S Consumption: 3 picks for 16 piles

ER 600 L – JCB JS 210

Exposing pile heads

Drum cutter ER 450 L on a Volvo EC 140 excavator. Exposing pile heads

ER 450 L – Volvo EC 140

Exposing pile heads

Exposing pile heads An ER 450 L works on the pile heads of secant pile wall as foundation for a flood protection facility at the River Mosel. The diameter of each pile amounts to 90 centimetres.

ER 450 L – CAT M 313

Exposing pile heads

Drum cutter ER 650 on a Kobelco SK 200 excavator. Exposing rebar cages

ER 650 – Kobelco SK 200

Exposing rebar cages

Drum cutter ER 250-3 L on a Hitachi ZX 85 excavator. Exposing pile heads

ER 250 L – Hitachi ZX 85

Exposing pile heads

ER 100 drum cutter on a CAT 304 excavator. Smoothing diaphragm walls

ER 100 – CAT 304

Smoothing diaphragm walls

Drum cutter ER 600-1 L on a CAT 315 excavator. Exposing pile heads

ER 600 L – CAT 315

Exposing pile heads

drum cutter ER 250-2 on a JCB 8080 ZTS excavator. Smoothing diaphragm walls

ER 250 – JCB 8080 ZTS

Smoothing diaphragm walls

Drum cutter ER 650 on a New Holland E 215 excavator. Removal of excess material

ER 650 – New Holland E 215

Removal of excess material

Drum cutter ER 250 on a Yanmar SV 100 excavator. Cleaning diaphragm walls

ER 250 – Yanmar SV 100

Cleaning diaphragm walls

ER 400-2 L drum cutter on a Liebherr A 316 excavator. Exposing pile heads

ER 400 L – Liebherr A 316

Exposing pile heads

Exposing rebar cages Erkat rotary drum cutters on a job site near the European XFEL X-ray Laser facility in Hamburg This was a project carried out by WIWA Wilko Wagner using two Erkat rotary drum cutters. They were used for the installation of retaining walls to depths of 15 to 16m in sandy ground conditions. An ER 650 mounted on a CAT 323D was used to expose the internal and external surfaces of the upper parts of the re-enforcement cage. The smaller ER 250 was mounted on a Vio 70 and was used for those areas where the ER 650 was too large. In this application, success depended to a large extent on the visual judgement and the skill of the excavator operator as it was important not to damage the steel re-enforcing bars while removing the material around the cage. Hydraulic breakers would not have been suitable for this type of work due to the high levels of vibration they produce. The drum cutters were used for a period of approx. 2 weeks.

ER 650 – CAT 323 and ER 250 - Vio 70

Exposing rebar cages

Drum cutter ER 100 on a Kubota KX 101 excavator. Profiling pile walls

ER 100 – Kubota KX 101

Profiling pile walls

Drum cutter ER 450 L on a Hyundai R 170 W excavator. Exposing rebar cages

ER 450 L – Hyundai R 170 W

Exposing rebar cages

Exposing pile heads “Michael Schumacher Business Avenue” in Dubai 2008: An ER 1500 L is working on piles with a diameter of 1200 mm.

ER 1500 L – Hyundai R 290

Exposing pile heads

Profiling pile walls An ERC 650 used to profiling work on a piled wall. With continuous, infinite rotation, the ERC 650 can reach all the required profiling positions with excessive movement of the excavator. This saves up to 30 percent of tracking time for the excavator.

ERC 650 – Liebherr A 904

Profiling pile walls

ERC 650 P drum cutter with rotation unit on a Daewoo S 180 excavator. Smoothing diaphragm walls

ERC 650 – Daewoo S 180

Smoothing diaphragm walls

Disclaimer

No two jobsites are alike.
The productivity depends on the material characteristics or rock hardness, the settings and condition of the carrier unit, the technical and wear condition of the attachment and the operator skills, as well as a couple of other factors. The given figures can vary based on different conditions. We reserve the right to change technical data without further notice.

Phone: +49 3695 85109-0
E-Mail: info@erkat.de

© 2021 erkat® | Anbaufräsen PC GmbH | Erkat does not sell its products in the United States and Canada. Erkat has no affiliation with Caterpillar Inc.
Imprint
Privacy Policy
Standard Sales Conditions