Kaiser Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
SX 70 8.5 190 ER 600 2 -
S10 110 10.2 200 ER 600 2 -
        ER 650 3 -
S12 110 10.2 200 ER 600 2 -
        ER 650 3 -
S2 117 10.0 190 ER 600 2 -
        ER 650 3 -
S2 4x4 117 10.2 190 ER 600 2 -
        ER 650 3 -
S2 4x4 Cross 117 10.5 190 ER 600 2 -
        ER 650 3 -
S2 4x4 Gator 117 10.5 190 ER 600 2 -
        ER 650 3 -
S10 HP 129 10.2 200 ER 600 2 -
        ER 650 3 -
S12 HP 129 10.2 200 ER 600 2 -
        ER 650 3 -

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.