CAT Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
301,5 13 1.6 2x16 ER 50 - 1
301,6 C 13.5 1.7 2x19.8 ER 50 1 2
301,8 C 13.5 1.8 2x19.8 ER 50 1 2
302,5 17 2.7 2x33.3 ER 50 2 3
        ER 100 1 3
302.2 D 17.9 2.1 2x23.8 ER 50 1 2
302.4 D 17.9 2.3 2x26.1 ER 50 1 2
302.7 D CR 17.9 2.7 89.4 ER 50 2 4
303 19 3.3 2x33.5 ER 100 1 3
304 CR 26.5 4.3 2x43.4 ER 100 2 4
304 E CR 30 4.0 87.6 ER 100 2 4
305 E CR 30 5.1 119.3 ER 100 - 2
305 E2 CR 30 5.2 150 ER 100 - 4
305 CR 31.3 4.8 2x52.1 ER 100 4 4
        ER 250 - 4
305.5 E CR 32.9 5.4 129.6 ER 100 - 4
305.5 E2 CR 32.9 5.4 163 ER 100 - 4
307 B 40 8.3 2x67 ER 250 2 4
307 C SB 41 8.1 2x64 ER 250 2 4
308 E2 CR SB 48.5 8.4 150 ER 250 - 4
311 F LRR 52 13.9 2x125 ER 250 4 -
        ER 600 1 2
311 C U 59 12.0 2x108 ER 250 4 -
        ER 600 1 2
314 E L CR 67 17.1 254 ER 600 2 -
        ER 650 1 3
314 C LCR 70 14.8 2x127 ER 600 1 2
312 E 70 15.7 254 ER 250 4 2
        ER 600 1 2
312 CL 71 13.5 2x127 ER 250 4 -
        ER 600 1 2
315 C L 83 17.4 2x150 ER 600 2 -
        ER 650 1 3
318 C 94 19.4 2x190 ER 650 3 -
        ER 1500 0 1
318 CL 94 20.0 2x185 ER 650 3 -
        ER 1500 0 1
320 D/DL 94 21.8 2x205 ER 650 3 -
        ER 1500 0 1
323 D L/LN 103 22.7 2x205 ER 650 3 -
        ER 1500 0 1
320 CL 103 23.0 2x205 ER 650 3 -
        ER 1500 0 1
321 C LCR 103 24.0 2x205 ER 650 3 -
        ER 1500 0 1
323 E LN 114 24.2 2x212 ER 650 3 -
        ER 1500 0 1
320 E LRR 114 25.6 2x212 ER 1500 0 2
323 E L 121 22.8 2x205 ER 650 3 -
        ER 1500 1 1
323 E 121 25.2 2x212 ER 1500 1 1
322 CL/CLN 123 26.0 2x220 ER 1500 1 2
324 D 124 27.1 2x220 ER 1500 1 3
325 C 128 30.0 2x235 ER 1500 1 2
325 C CR 128 38.0 2x235 ER 1500 1 2
325 D 140 31.4 2x235 ER 1500 1 2
328 D LCR 152 35.4 2x235 ER 1500 1 2
329 E 173 31.3 2x247 ER 1500 2 3
330 C 181 36.0 2x280 ER 1500 3 -
330 D 200 37.0 2x280 ER 1500 3 -
        ER 2000 1 2
336 F XE 226 40.3 2x285 ER 1500 3 -
        ER 2000 1 2
345 B 239 49.0 2x360 ER 2000 2 3
345 C 239 50.6 2x360 ER 2000 2 3
345 D 283 45.4 2x367 ER 2000 2 3
        ER 3000 1 2
349 E 295 53.3 2x385 ER 2000 3 -
        ER 3000 1 2
365 C 302 70.2 2x400 ER 3000 2 3
374 F 352 75.2 2x448 ER 5500 - 1
385 B 382 91.0 2x490 ER 5500 1 2
385 C 390 88.3 2x490 ER 5500 1 2
Wheeled Excavators
M 313 C 86 14.7 190 + 80 ER 600 2 -
        ER 650 1 2
M 315 C 91 16.5 220 + 80 ER 600 2 -
        ER 650 2 3
M 316 C 103 18.0 250 + 80 ER 600 2 -
        ER 650 2 3
M 318 C 113 19.7 288 + 112 ER 650 3 -
M 322 C 122 22.7 350 + 112 ER 650 1 3
        ER 1500 1 2
M 325 C MH 128 31.5 2x235 ER 1500 1 2
M 325 C LMH 140 37.0 2x235 ER 1500 1 2
Backhoe Loaders
422 E 57 KW 57 10.2 125 ER 250 4 -
428 D Backhoe 59 8.0 163 ER 250 4 -
422 E 67 KW 67 10.2 125 ER 250 4 -
432 E 69 10.7 156 ER 250 4 -
434 E 69 10.7 156 ER 250 4 -
428 E 73 KW 73 10.2 125 ER 250 4 -
442 E 73 10.7 156 ER 250 4 -
444 E 73 10.7 156 ER 250 4 -

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.