VC 2000

V-shaped design

VC 2000

V-shaped design

Drum cutter VC 2000

Demolition

Tunnelling

VC 2000 launch

The new V Cutter. VC 2000

Enjoy the live launch event

0:00

Progress: 0%

V-shaped drum cutter

Different motor variants available - find more information below

VC 2000

Metric
US/Imperial

Technical Data

Carrier weight class ¹	20 t - 40 t 44 000 lb - 88 000 lb
Service weight ²	2 000 kg 4 400 lb
Product weight	1 700 kg 3 860 lb
Nominal power	120 kW
Rotation speed	75 rpm
Optimum oil flow ³	205 l/min - 300 l/min 54,2 gal/min - 79,3 gal/min
Max. torque @ 350 bar	23 400 Nm
Max. cutting force @ 350 bar	65 000 N
Pick shaft diameter	30 mm 1,2 inch
Number of picks	60 pc
Max. oil flow @ 10 bar	40 l/min 85 gal/min
Max. operating pressure	350 bar 5 076 psi

Weights apply to standard carriers only. Any variances must be agreed with Epiroc and/or the carrier manufacturer prior to attachment.
Attachment with standard picks & average-sized adapter plate.
Various motor variants available per model.

Measurements

Length of drum cutter (A): 1,470 mm

Width of cutting head (B): 1,020 mm

Diameter of cutting head (C): 720 mm

Download our brochures

Simplicity prevails

Some product features can be complicated to explain, this is not the case with the V Cutter. Here, the benefits are visible to the naked eye. A seemingly simple solution with an extraordinary leverage. Especially compared to a chain cutter.

40% less picks needed
50% lower maintenance time
Lower weight = Lower fuel consumption
No overhauling needed
Easy handling
Minimum wear on carrier
Lower environmental impact
Work under water

V-shaped design

for optimal efficiency and even depth over the entire width of the cut

High load resistant output shaft bearing system

with maintenance-free slide ring seal system

No more zig-zag

easy handling, works like a bucket

Adoptable high torque radial piston motor

for higher productivity and motor lifetime

VC 2000 with water spraying system

Pro Bracket

Click and read more

Robust housing with wear protection

for higher uptime

360° endless hydraulic rotation bracket

available as an option

More information about the V-shaped drum cutter

What different models are available?

We have the VC 2000-0 X, VC 2000-1 X, VC 2000-2 X and VC 2000-3 X

What is the difference between the models?

They have different motors

What is the difference of the motors?

		VC 2000-0 X	VC 2000-1 X	VC 2000-2 X	VC 2000-3 X
Recommended rotation speed	rpm	75	75	75	75
Recommended oil flow	l/min	205	240	260	300
Maximum oil flow at 10 bar	l/min	320	320	320	320
Maximum operating oil pressure	bar	350	350	350	350
Torque at 350 bar	Nm	15,600	17,500	19,500	23,400
Cutting force at 350 bar	N	43,300	48,600	54,200	65,000

Related products

ER range

The transverse drum cutter is ideally suited for trenching, tunneling, special foundation work, demolition and for soil mixing. The operating characteristics of Erkat special drum cutters allow them to be used in noise and vibration sensitive areas.

ERC drum cutter range

The ERC range from Erkat represents a new generation of revolving rotary drum cutters that extends significantly the number of applications suitable for transverse drum cutters.

ER-L range

Longitudinal drum cutters are driven by a powerful radial piston motor creating extremely high cutting forces. The robust cutter drums together with their secure fixing method enable them to operate in the most demanding conditions. Consoles can be supplied with different lengths to suit a variety of applications.

ADU range

ADU auger drive units are almost indestructible, high performance drives that have proven themselves many times while successfully drilling holes in medium hard limestone with 60 MPa compressive strength.

Applications for drum cutters and auger drive units

This is an overview about the applications for our drum cutters and auger drive units.