ER 2000 L

Q: What different models are available?

We have the ER 2000-1 L, ER 2000-2 L and ER 2000-3 L

Longitudinal Drum Cutters

Different motor variants available - find more information below

ER 2000 L

Metric
US/Imperial

Technical Data

Carrier weight class ¹	35 t - 50 t 77 200 lb - 110 200 lb
Service weight ²	1 800 kg 3 970 lb
Product weight	1 500 kg 3 310 lb
Nominal power	160 kW
Rotation speed	65 rpm
Optimum oil flow ³	300 l/min - 390 l/min 79,3 gal/min - 103 gal/min
Max. torque @ 350 bar	33 500 Nm
Max. cutting force @ 350 bar	93 000 N
Pick shaft diameter	30 mm 1,2 inch
Number of picks	28
Max. oil flow @ 10 bar	410 l/min 108,3 gal/min
Max. operating pressure	350 bar 5 076 psi

Weights apply to standard carriers only. Any variances must be agreed with Epiroc and/or the carrier manufacturer prior to attachment.
Attachment with standard picks & average-sized adapter plate.
Various motor variants available per model.

Measurements

Length of drum cutter (A): 1,500 mm

Width of cutting head (B): 600 mm

Diameter of cutting head (C): 720 mm

All ER-L drum cutters

Download our brochures

More information about ER-L rotary drum cutters

What different models are available?

We have the ER 2000-1 L, ER 2000-2 L and ER 2000-3 L

What is the difference between the models?

They have different motors

What is the difference of the motors?

		ER 2000-1 L	ER 2000-2 L	ER 2000-3 L
Recommended rotation speed	rpm	75	68	65
Recommended oil flow	l/min	300	340	390
Maximum oil flow at 10 bar	l/min	410	410	410
Maximum operating oil pressure	bar	350	350	350
Torque at 350 bar	Nm	22,300	27,800	33,500
Cutting force at 350 bar	N	60,300	75,100	90,500

What is the standard pick for the ER 2000 L?

Round attack pick

ER 19/75/70/30 Q

Application: Concrete, medium hard rock

Part number.: 3311004576 with QS

Part number: 3311004607 with ES

What is the right pick box for the ER 2000 L?

Pick box: PH 1500

Part number: 3311000792

Replacement wear sleeve

Part number: 3311000801

How can you fix the picks on the pick box?

QuickSnap

QS 5000

Part number: 3311000978

Retaining clip

ES 5000

Part number: 3311002869

What about additional picks, pick boxes and retainers?

Round attack pick

ER 15/90/70/30 Q

Application: Salt, gypsum, medium hard, fractured rock

Part number: 3311004580 with QS

Part number: 3311004614 with ES

Round attack pick

ER 19/75/70/30 Q

Application: Concrete, medium hard rock

Part number: 3311004576 with QS

Part number: 3311004607 with ES

Round attack pick

ER 22/75/70/30 Q

Application: Concrete, medium hard to hard rock

Part number: 3311004577 with QS

Part number: 3311004608 with ES

Find more options in our cutting tools brochure. Click here

Compact housing design

for higher uptime

Variety of cutting heads for various applications available

Strong and robust output drive shaft with lubrication-free slide ring seal system

for minimum downtime

Adoptable high torque radial piston motor

for higher productivity

Cutting head can be replaced by drilling auger for soft rock drilling

Can be used up to 30 meters underwater without additional installation or modification

Related products

ER range

The transverse drum cutter is ideally suited for trenching, tunneling, special foundation work, demolition and for soil mixing. The operating characteristics of Erkat special drum cutters allow them to be used in noise and vibration sensitive areas.

ERC drum cutter range

The ERC range from Erkat represents a new generation of revolving rotary drum cutters that extends significantly the number of applications suitable for transverse drum cutters.

ADU range

ADU auger drive units are almost indestructible, high performance drives that have proven themselves many times while successfully drilling holes in medium hard limestone with 60 MPa compressive strength.

Applications for drum cutters and auger drive units

This is an overview about the applications for our drum cutters and auger drive units.

ER 2000 L

Drum cutter ER 2000 L

Pile Head Cutting

Digging maintenance holes

Longitudinal Drum Cutters

ER 2000 L

Measurements

All ER-L drum cutters

Download our brochures

More information about ER-L rotary drum cutters

What different models are available?

What is the difference between the models?

What is the difference of the motors?

What is the standard pick for the ER 2000 L?

What is the right pick box for the ER 2000 L?

How can you fix the picks on the pick box?

What about additional picks, pick boxes and retainers?

Compact housing design

Variety of cutting heads for various applications available

Strong and robust output drive shaft with lubrication-free slide ring seal system

Adoptable high torque radial piston motor

Cutting head can be replaced by drilling auger for soft rock drilling

Can be used up to 30 meters underwater without additional installation or modification

Related products

ER range

ERC drum cutter range

ADU range

Applications for drum cutters and auger drive units