Terex-Schaeff Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
TC 10 7.6 1.2 23 - - -
TC 15 11 1.6 2x17 + 14 ER 50 - 1
HR 11 13 1.5 2x19 + 13 ER 50 1 -
HR 12 13 1.6 33 + 19 ER 50 1 -
TC 16 13 1.7 31 + 18 ER 50 2 -
HR 1.6 13 1.7 31 + 18 ER 50 2 -
HR 13 13 1.9 33 + 19 ER 50 2 -
TC 20 13 2.0 31 + 18 ER 50 2 -
HR 2.0 13 2.0 31 + 18 ER 50 2 -
HR 14 17.5 2.9 99 ER 50 4 -
TC 29 17.5 2.9 99 ER 50 4 -
TC 35 22 3.5 95 ER 50 4 -
        ER 100 2 -
HR 16 22 3.5 95 ER 50 4 -
TC 37 22 3.7 95 ER 100 1 -
HR 3.7 22 3.7 95 ER 100 1 -
TC 50 26.5 5.0 140 ER 100 4 -
HR 5.0 26.5 5.0 140 ER 100 4 -
TC 48 29 4.8 2x57 + 37 ER 100 4 -
HR 18 29 4.8 2x57 + 37 ER 100 4 -
TC 60 32.2 5.6 2x62 + 43 ER 100 4 -
HR 20 32.2 5.6 2x62 + 43 ER 100 4 -
HR 22 44 5.5 115 + 28 ER 100 4 -
HR 31 53 7.5 142 ER 100 3 -
HR 32 54 7.5 158 ER 250 4 -
TC 75 54 7.5 158 ER 250 4 -
HR 41 59 10.5 180 ER 250 4 -
HR 42 75 12.5 190 ER 250 4 -
        ER 600 1 -
TC 125 75 12.5 190 ER 250 4 -
        ER 600 1 -
TE 210 (-2007) 142 26.0 380 + 90 ER 1500 2 -
TE 210 (2007+) 165 28.0 520 ER 1500 3 -
Wheeled Excavators
HML 22 44 6.0 100 ER 100 4 -
TW 70 49 6.8 2x62 ER 100 4 -
HML 31 53 8.5 142 ER 250 3 -
HML 41 59 10.0 230 ER 250 4 -
TW 85 67 8.5 142 ER 250 4 -
HML 32 67 8.5 142 ER 250 4 -
HML 42 75 11.0 190 ER 250 4 -
        ER 600 1 -
TW 110 75 11.0 190 ER 250 4 -
        ER 600 1 -

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.