Takeuchi Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
TB 108 7.1 0.8 21.4 - - -
TB 210 R 8.8 1.2 2x11.1 - - -
TB 016 9 1.6 2x17 + 10 ER 50 1 -
TB 215 R 11.5 1.7 2x16.8 ER 50 - 2
TB 216 ÜB 11.5 1.9 2x16.8 ER 50 - 2
TB 216 A 11.5 2.0 2x16.8 ER 50 - 2
TB 219 ÜB 12 2.1 2x20 ER 50 - 4
TB 219 A 12 2.2 2x20 ER 50 - 4
TB 23 R-ÜB 14.4 2.6 2x23 ER 50 - 4
        ER 100 - 1
TB 23 R-A 14.4 2.7 2x23 ER 50 - 4
        ER 100 - 1
TB 125 16.8 2.8 2x30 + 20 ER 50 2 4
TB 216 E 17 1.9 2x16.8 ER 50 - 2
TB 230 A 17.3 3.1 2x32.4 ER 100 - 2
TB 230 ÜB 17.6 3.0 2x32.4 ER 100 - 2
TB 138 FR 20.5 3.9 2x37.2 + 22 ER 100 1 3
TB 135 20.9 3.4 2x40 + 20 ER 100 1 2
TB 240 ÜB 27.2 4.1 2x41.8 ER 100 - 4
TB 240 A 27.2 4.3 2x41.8 ER 100 - 4
TB 145 27.3 4.8 2x56 + 32.4 ER 100 3 4
TB 153 FR 28.9 5.6 2x56 + 39 + 11 ER 100 3 4
TB 250 ÜB 29.5 5.2 2x58.3 ER 100 - 4
TB 250 A 29.5 5.3 2x58.3 ER 100 - 4
TB 260 34.3 6.1 2x58.3 ER 100 3 4
        ER 250 4 -
TB 175 42.8 7.3 2x69 + 53 ER 250 3 4
TB 290 51.6 8.8 160x60.6 + 16 ER 250 4 -
TB 290 V 51.6 9.2 160x60.6 + 16 ER 250 4 -
TB 280 FR 51.6 9.9 2x37.2 ER 250 4 -
TB 1140 E 75 15.7 2x112 ER 600 1 2
TB 1140 77 15.7 2x112 ER 600 1 2
Wheeled Excavators
TB 175 W 50 8.1 2x69 + 53 ER 250 4 -
TB 295 W 77 10.4 160 ER 250 4 -
TB 295 W-P 77 10.5 160 ER 250 4 -
TB 1160 W 95 15.5 2x132.2 ER 600 1 2
TB 1160 W-P 95 15.9 2x132.2 ER 600 1 2

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.