Sany Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
SY 20 C 10.3 1.8 41.8 ER 50 1 3
SY 16 C 3Y4W 11.2 1.8 45 ER 50 2 4
SY 16 C 11.2 1.8 48 ER 50 2 4
SY 35 U 20.4 3.8 88 ER 100 1 2
SY 50 29.1 5.4 50 + 5 ER 100 1 3
SY 80 C-9S 42 7.9 149 ER 250 2 4
SY 75 C 43 7.3 90 ER 250 1 3
SY 75 C 9I4R (US) 43 7.3 90 ER 250 1 3
SY 60 45 5.8 149 ER 100 3 4
SY 140 C-9 72.2 14.0 2x121 ER 600 1 2
SY 140 C-9i 72.2 14.0 2x121 ER 600 1 2
SY 135 C 77 14.9 2x121 ER 600 1 2
SY 210 C 104 20.9 2x210 ER 650 3 -
        ER 1500 0 2
SY 220 C 114 21.9 2x220 ER 1500 0 2
SY 215 C 122 22.6 2x220 ER 1500 0 2
SY 215 LC 122 23.6 2x220 ER 1500 0 2
SY 235 C 128.5 24.2 2x252 ER 1500 1 3
SY 240 C 128.5 24.2 2x219 ER 1500 0 2
SY 235 CLC 142 25.2 2x252 ER 1500 2 3
SY 245 142 25.5 2x246 ER 1500 1 3
SY 235 CLR 142 27.6 2x252 ER 1500 2 3
SY 335 C 190.5 34.3 2x320 ER 1500 3 -
        ER 2000 1 3
SY 380 LC-9H 190.5 35.0 2x360 ER 2000 2 3
SY 365 C 205 35.2 2x360 ER 2000 2 3
SY 365 C9C5K 205 36.2 2x360 ER 2000 2 3
SY 465 H 250 45.5 2x400 ER 2000 3 3
        ER 3000 2 -
SY 480 LC-9H 250 45.5 2x400 ER 2000 3 -
        ER 3000 2 3
SY 500 300 50.1 2x360 ER 2000 2 3
        ER 3000 1 3

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.