Samsung Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.

back

Model	Engine power	Operating weight	Oil flow	Recom. cutter	Recom. motor displacement	Recom. motor displacement
	kW	t	l/min	ER series	One pump flow	Double pump flow
Double pump flow is not always available on excavators as standard. In some cases, modifications are required to obtain double pump flow. If you are unsure of the hydraulic flow available, contact your local excavator dealer. Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model

Engine
power

Operating
weight

Oil flow

Recom.
cutter

Recom. motor
displacement

l/min

ER series

One pump
flow

Double pump
flow

Double pump flow is not always available on excavators as standard. In some cases, modifications are required to obtain double pump flow. If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model	Engine power	Operating weight	Oil flow	Recom. cutter	Recom. motor displacement	Recom. motor displacement
SE 50-3	38	4.9	2x52.4	ER 100	4	-
SE 130 W	73	12.9	2x130	ER 600	1	2
SE 130 LC-2	74	13.0	2x130	ER 600	1	2
SE 130 LCM-2	74	13.8	2x130	ER 600	1	2
SE 130 LC-3	79	14.0	2x120	ER 600	1	2
MX 6	79	14.2	2x125	ER 600	1	2
SE 130 LCM-3	79	15.4	2x110	ER 600	1	2
SE 170 W	105	18.5	2x200	ER 650	3	-
				ER 1500	0	1
MX 8	105	19.4	2x215	ER 650	3	-
SE 200	105	19.4	2x220	ER 650	3	-
				ER 1500	0	-
SE 210	105	19.5	2x200	ER 650	3	-
				ER 1500	0	2
SE 210 LC-3	107	20.5	2x200	ER 650	3	-
				ER 1500	0	2
SE 210 LC-3 (Long Reach)	107	22.5	2x200	ER 650	3	-
SE 240 LC-3	125	24.1	2x230	ER 1500	1	2
SE 240 LC-3 (Long Reach)	125	26.2	2x230	ER 650	3	-
				ER 1500	1	2
MX 10	128	27.0	2x248	ER 1500	1	3
SE 280 LC-2	128	28.5	2x255	ER 1500	2	3
SE 280 LC-3	160	30.0	2x250	ER 1500	2	3
SE 350 LC-2	184	35.2	2x280	ER 1500	3	-
SE 450 LC-2	221	43.7	2x330	ER 2000	2	3
Double pump flow is not always available on excavators as standard. In some cases, modifications are required to obtain double pump flow. If you are unsure of the hydraulic flow available, contact your local excavator dealer. Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

back