Menzi Muck Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
A20 17.6 2.0 48 ER 50 3 -
A40 49 4.5 65 ER 100 4 -
M320 90 8.5 150 ER 250 4 -
        ER 600 2 -
M325 90 8.8 150 ER 250 4 -
        ER 600 2 -
M340 90 10.2 150 ER 250 4 -
        ER 600 2 -
M520 115 10.7 190 ER 600 2 -
        ER 650 3 -
M525 115 11.0 190 ER 600 2 -
        ER 650 3 -
M530 115 11.3 190 ER 600 2 -
        ER 650 3 -
M535 115 11.6 190 ER 600 2 -
        ER 650 3 -
M540 115 12.0 190 ER 600 2 -
        ER 650 3 -
M545 115 12.3 190 ER 600 2 -
        ER 650 3 -

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.