Link-Belt Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
130 X2 + X3 + X4 76.4 13.8 2x129 ER 600 1 2
160 X2 + X3 + X4 83.2 17.4 2x142 ER 600 2 -
        ER 650 1 2
210 X2 + X3 + X4 119.3 22.2 2x211 ER 650 2 2
        ER 1500 0 2
240 X2 132 24.9 2x234 ER 1500 1 3
250 X3 + X4 132 25.8 2x234 ER 1500 1 3
240 X2 LF 132 28.0 2x234 ER 1500 1 3
290 X2 154 29.8 2x243 ER 1500 1 3
300 X3 + X4 154 30.4 2x243 ER 1500 1 3
350 X2 + X3 198 36.3 2x300 ER 2000 1 3
460 X2 245 47.9 2x360 ER 2000 2 3
470 X3 245 50.6 2x364 ER 2000 2 3
490 X4 270 51.2 2x364 ER 2000 2 3
700 X2 317 69.7 2x440 ER 3000 2 3
        ER 5500 - 1
800 X2 369 81.1 2x500 ER 5500 1 2

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.