Kobelco Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
SK 09 SR 6 1.0 2x11 - - -
SK 10 SR-2 6.1 1.0 2x11 - - -
SK 13 SR 8.8 1.4 2x14.8 + 6 ER 50 - 2
Sk 17 SR-3 11.7 1.6 2x16.3 ER 50 - 1
SK 25 SR-2 13 2.5 2x24 + 21 + 12 ER 50 1 4
SK 27 SR-5 16.6 2.5 2x26.4 ER 50 1 4
SK 30 SR-2 17 3.1 2x30 + 23 ER 50 4 4
        ER 100 - 1
SK 35 SR-2 17 3.6 2x34.8 + 25.4 ER 100 1 2
SK 30 SR-5 22.5 3.2 2x38.4 ER 100 1 2
SK 35 SR-5 22.5 3.6 2x38.4 ER 100 1 2
SK 45 SR-2 27 4.8 2x52.2 + 36.7 ER 100 2 4
SK 55 SRX-6 28.3 4.9 2x49.9 ER 100 1 4
SK 70 SR 40 6.5 2x66 ER 100 4 4
SK 80 CS 40 8.0 2x66 + 48.5 ER 250 3 4
SK 80 MSR 40.4 8.1 2x66 ER 250 2 4
SK 75 SR-3E 42 7.5 2x66 ER 250 3 4
SK 85 MSR-3E 42 8.3 2x66 ER 250 2 4
SK 115 SR 58.8 12.7 2x118 ER 250 4 -
        ER 600 1 2
SK 115 DZ 62 14.4 2x118 ER 250 4 -
        ER 600 1 2
ED 160 69.2 15.7 2x130 ER 600 1 2
        ER 650 1 3
SK 135 SR LC 70 14.0 2x118 ER 250 4 -
        ER 600 1 2
ED 150 70 16.2 2x118.9 + 56 ER 600 1 2
        ER 650 1 3
SK 140 SRCL-3 74 14.4 2x130 ER 250 4 -
        ER 600 1 2
SK 170 LC 83 16.5   ER 600 2 -
        ER 650 1 2
ED 190 83 19.8 2x143.4 + 60.2 ER 650 1 3
SK 200 SR 92 19.9 2x176 ER 650 2 -
        ER 1500 - 1
SK 200 SR LC 92 22.0 2x176 ER 650 2 -
        ER 1500 - 1
SK 235 SR 107 23.8 2x210 ER 650 3 -
        ER 1500 0 2
SK 210 NLC 110 20.4 2x210 ER 650 3 -
        ER 1500 0 2
SK 210 LC 110 21.4 2x210 ER 650 3 -
        ER 1500 0 2
SK 235 SRLC/NLC 110 24.0 2x210 ER 650 3 -
        ER 1500 0 2
SK 210 LC-9 117 21.2 2x220 ER 650 3 -
        ER 1500 0 2
SK 210 NLC-10 119 21.7 2x220 ER 650 3 -
        ER 1500 0 2
SK 210 NLC-9 124 21.2 2x220 ER 650 3 -
        ER 1500 0 2
SK 210 LC-10 124 21.7 2x220 ER 650 3 -
        ER 1500 0 2
SK 230 SR-3 124 22.5 2x220 ER 650 3 -
        ER 1500 0 2
SK 230 SRLC-3 124 22.9 2x220 ER 650 3 -
        ER 1500 0 2
SK 260 RBLC-3 124 24.8 2x220 ER 1500 0 2
SK 260 SRLC-3 124 24.9 2x220 ER 1500 0 2
SK 250 NLC 130 25.0 2x240 ER 1500 1 3
SK 250 LC 130 25.0 2x240 ER 1500 1 3
SK 260 LC-9 131 25.6 2x246 ER 1500 2 3
SK 260 NLC-9 137 25.6 2x246 ER 1500 2 3
SK 290 LC 142 30.1 2x240 ER 1500 1 3
SK 330 NLC 177 35.0 2x253 ER 1500 2 3
        ER 2000 - 2
SK 330 LC 181 35.3 2x253 ER 1500 2 3
SK 350 LC-9 201 35.4 2x294 ER 1500 3 -
        ER 2000 1 2
Sk 350 NLC-9 213 35.4 2x294 ER 1500 3 -
        ER 2000 1 2
SK 480 LC 232 49.0 2x370 ER 2000 2 3
        ER 3000 1 3
SK 500 LC-9 257 48.4 2x370 ER 2000 3 -
        ER 3000 1 3

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.