Kaiser Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
HD 308 USV 40 7.3 2x74 ER 250 3 4
HD 512 R 68 12.1 2x121 ER 250 4 -
        ER 600 1 2
HD 512 V 71 12.8 2 x121 ER 250 4 -
        ER 600 1 2
HD 513 MRV 71 14.1 2 x121 ER 250 4 -
        ER 600 1 2
HD 820 R 110 20.3 2x235 ER 1500 1 3
HD 820 V 112.5 20.7 2x235 ER 1500 1 3
HD 823 MRV 112.5 23.3 2x235 ER 1500 1 3
HD 1023 R 125 23.6 2x247 ER 1500 2 3
HD 1430 R 183 31.2 2x301 ER 1500 3 -
        ER 2000 1 3
HD 1430 V 183 31.8 2x307 ER 1500 3 -
        ER 2000 1 3
HD 2045 III 235 46.2 2x370 ER 2000 3 -
        ER 3000 1 3

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.