John Deere Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
17 G 10.8 1.7 2x19.2 ER 50 - 2
26 G 14.9 2.8 2x36 ER 50 4 -
        ER 100 - 1
35 G 17.4 3.5 2x38.4 ER 100 1 3
50 G 26.8 4.8 87.4 ER 100 4 -
60 G 39.6 6.1 144 ER 100 4 -
75 G 42.4 8.3 2x72 ER 250 3 4
85 G 42.4 8.5 2x72 ER 250 3 4
130 G 73 14.3 2x105 ER 250 4 -
        ER 600 1 2
135 G 75 15.4 2x105 ER 250 4 -
        ER 600 1 2
160 G LC 90 17.9 2x191 ER 650 3 -
180 G LC 95 20.5 2x191 ER 650 3 -
        ER 1500 - 1
190 G W 119 20.2 2x165 ER 650 1 3
210 G LC 119 23.6 2x212 ER 1500 0 2
230 G W 119 23.6 2x189 ER 1500 0 2
245 G LC 119 25.8 2x212 + 189 ER 1500 0 3
250 G LC 140 26.2 2x224 ER 1500 1 3
300 G LC 166 31.1 2x236 ER 1500 1 3
350 G LC 202 35.6 2x288 ER 1500 3 -
        ER 2000 - 2
380 G LC 202 38.1 2x288 ER 1500 3 -
        ER 2000 - 2
470 G LC 270 49.4 2x400 ER 2000 3 -
        ER 3000 2 3
670 G LC 345 69.9 2x489 ER 3000 3 -
        ER 5500 - 1
870 G LC 382 85.6 2x566 ER 5500 - 2
Backhoe Loaders
310 L EP 52 7.2 119 ER 250 - 4
310 L 69 7.3 106 ER 250 - 4
310 SL 74 8.1 136 ER 250 - 4
315 SL 74 8.4 136 ER 250 - 4
315 SL HL 82 8.5 159 ER 250 4 -
        ER 600 - 1
410 L 84 8.8 159 ER 250 4 -
        ER 600 - 1
710 L 110 12.3 197 ER 600 1 2

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.