Hydrema Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
R 1820 91 18.0 260 ER 600 1 -
Wheeled Excavators
M 800 55 8.8 165 ER 250 4 -
M 1100 C 75 11.2 165 ER 250 4 -
M 1220 75 12.7 165 ER 250 4 -
M 1700 85 17.0 260 ER 250 4 -
M 1400 C 91 14.2 260 ER 250 4 -
M 1500 B 93 15.0 260 ER 250 4 -
M 1620 C 96 15.2 260 ER 600 1 2
M 1700 C 96 17.0 260 ER 600 1 2
MX 14 123 15.7 319 ER 650 3 -
MX 16 123 17.1 319 ER 650 3 -
MX 18 123 18.4 319 ER 650 3 -
Backhoe Loaders
908 E 86 9.1 163 ER 250 4 -
        ER 600 1 -
906 E 86 9.2 163 ER 250 4 -
        ER 600 1 -
928 E 105 9.4 220 ER 600 1 2
926 E 105 9.5 220 ER 600 1 2

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.