Hitachi Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
EX 8-2 B 6.4 0.8 2x9.7 - - -
ZX 16 8.8 1.6 2x16.1 ER 50 - 1
ZX 18 8.8 1.8 2x16.1 ER 50 - 1
ZX 25 13.7 2.5 2x26.4 ER 50 2 4
ZX 27 U-2 19.4 3.4 2x35.2 ER 50 3 4
        ER 100 1 2
ZX 30 19.9 3.0 2x39.1 ER 50 4 4
        ER 100 2 2
ZX 35 19.9 3.2 2x39.1 ER 50 4 4
        ER 100 2 2
ZX 30 U-2 22.1 3.7 2x40 ER 50 4 4
        ER 100 1 2
ZX 35 U-2 22.1 3.9 2x40 ER 50 4 4
        ER 100 1 2
ZX 40 26.5 4.2 2x42.0 ER 100 1 4
ZX 50 26.5 4.6 2x42.0 ER 100 1 4
ZX 40 U-2 29.5 4.8 140 ER 100 1 4
ZX 50 U-2 29.8 5.0 125 ER 100 4 4
ZX 70 39 7.0 2x63.0 ER 100 4 4
        ER 250 2 4
ZX 80 SB 39 8.0 2x69.3 ER 250 4 4
ZX 85 US 40 7.6 2x69.3 ER 250 4 4
ZX 70 LC 40.5 6.5 2x63 + 52.5 ER 100 4 4
        ER 250 2 4
ZX 110 61 11.0 2x100 ER 250 4 -
        ER 600 1 2
ZX 130 / 130 LCN 66 14.0 2x105 ER 600 1 2
ZX 160 82.2 17.0 2x138 ER 600 1 2
        ER 650 1 3
ZX 130 W 87.5 15.0 2x176 ER 650 2 2
        ER 600 2 -
ZX 160 W 90.2 18.0 2x184 ER 650 3 3
        ER 1500 0 1
ZX 180 W 90.2 19.0 2x200 ER 650 3 3
        ER 1500 0 1
ZX 180 90.2 19.0 2x150 ER 600 2 2
        ER 650 1 3
ZX 210 108 22.2 2x194 ER 650 3 3
        ER 1500 0 1
ZX 240 108 23.0 2x194 ER 650 3 3
        ER 1500 0 1
ZX 225 US 108 24.0 2x194 ER 650 3 3
        ER 1500 0 1
ZX 225 US R 108 24.3 2x194 ER 650 3 3
        ER 1500 0 1
ZX 210 W 110 21.0 2x214 ER 650 3 3
        ER 1500 1 3
ZX 210 3 122 20.3 2x194 ER 650 3 3
        ER 1500 0 1
ZX 240 N-3 122 23.2 2x212 ER 650 3 3
        ER 1500 0 1
ZX 250 123 26.0 2x204 ER 650 3 3
        ER 1500 0 1
ZX 230 125 23.6 2x204 ER 650 3 3
        ER 1500 0 1
ZX 280 129 28.0 2x209 ER 1500 0 2
ZX 250 LC a 132 26.9 2x216 ER 650 3 3
        ER 1500 1 2
ZX 280-3 140 28.0 2x227 ER 1500 1 3
ZX 350 180 34.5 2x290 ER 1500 3 3
        ER 2000 1 2
ZX 330 184 32.6 2x290 ER 1500 3 3
ZX 350 LCN a 202 36.1 2x288 ER 1500 3 3
        ER 2000 1 3
ZX 350 LC a 202 36.2 2x288 ER 1500 3 3
        ER 2000 1 2
ZX 460 231 46.0 2x360 ER 2000 3 3
        ER 3000 1 3
ZX 500 LC 231 50.0 2x360 ER 3000 1 3
ZX 470 LCH-3 260 48.1 2x360 ER 2000 2 3
        ER 3000 2 3
ZX 520 LCH-3 260 52.5 2x360 ER 2000 2 3
        ER 3000 2 3
ZX 600 / 650 H 295 58.4 2x434 ER 3000 3 3
        ER 5500 - 1
ZX 800 / 850 340 75.0 2x502 ER 3000 3 -
        ER 5500 1 3
ZX 670 LCH-3 345 68.4 2x456 ER 3000 3 3
        ER 5500 - 2
ZX 870 LCH-3 397 85.5 2x528 ER 3000 3 3
        ER 5500 - 2
EX 1200-5 510 111.0 3x495 ER 5500 1 3

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.