Hidromek Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
HMK 140 LC 74.9 14.9 2x130 ER 600 1 2
HMK 220 LC 120.7 22.8 2x234 ER 1500 1 2
HMK 220 LCLR 120.7 24.5 2x234 ER 1500 1 2
HMK 300 LC 153 32.4 2x250 ER 1500 2 3
HMK 370 LCLR 153 41.8 2x290 ER 2000 1 2
HMK 370 LC HD 205 39.8 2x290 ER 1500 3 2
        ER 2000 1 -
HMK 370 LC D 205 44.5 2x290 ER 2000 1 2
Wheeled Excavators
HMK 140 W 70.9 16.2 2x160 ER 600 2 -
HMK 200 W 122 21.8 2x234 ER 1500 1 2
Backhoe Loaders
HMK 62 SS 44 3.8 61 ER 100 2 -
HMK 102 Alpha 74.5 9.5 163 ER 250 4 -
HMK 102 Supra 74.5 9.8 163 ER 250 4 -

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.