ER 650 – Komatsu PC 200

Asphalt removal


Progress: 0%

Drum cutter ER 650 application video

Asphalt removal


Application details


An ER 650 mounted on a Komatsu PC 200 in India — the job is cutting of old asphalt from 20 to 25 cm thickness.  The asphalt is very soft (approx. 15 MPa) so the output is 15-25 m3 per hour and the pick consumption is less than 5 per 100 m3.

The customer plan to screen the cut material and re-use the same as GSB (granular sub base) and WMM (wet mix macadam) material in the new road.  Required is an output size less than 60 mm so that cut material can be reused without any further crushing.


No two jobsites are alike.
The productivity depends on the material characteristics or rock hardness, the settings and condition of the carrier unit, the technical and wear condition of the attachment and the operator skills, as well as a couple of other factors. The given figures can vary based on different conditions. We reserve the right to change technical data without further notice.