Yanmar Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
SV 05 5.3 0.6 2x2.7 - - -
SV 08-1 7.7 1.1 2x2.7 - - -
ViO 10-2 A 9.2 1.2 19 - - -
SV 17 9.5 1.8 2x17.6 ER 50 - 1
SV 18 9.5 1.8 2x17.6 ER 50 - 1
SV 17 EX 9.5 1.9 2x17.6 ER 50 - 1
ViO 15-2 A 10 1.7 2x17.6 ER 50 - 1
ViO 17 10 1.8 2x17.6 ER 50 - 1
B 15-3 EX 10.3 1.8 2x17.6 ER 50 - 1
B 18 EX 10.3 1.8 2x17.6 ER 50 - 1
SV 15 12.1 1.7 2x17.6 ER 50 - 1
SV 22 13.4 2.1 50 ER 50 - 2
ViO 20 14.3 2.3 37 ER 50 - 1
ViO 20-4 14.3 2.4 2x21.6 ER 50 - 2
ViO 25-4 15.2 2.7 2x30 ER 50 - 3
ViO 25 15.2 2.8 50 ER 50 - 2
B 25 V 15.3 2.8 50 ER 50 - 2
SV 26 17.6 2.7 2x32.4 ER 50 - 3
ViO 33 U 18.3 3.4 2x37.5 ER 100 - 2
ViO 35 18.3 3.6 60 ER 100 - 2
ViO 30 18.4 3.3 58 ER 100 - 1
ViO 25-6 20.4 2.9 2x30 ER 50 - 4
ViO 35-6 20.4 3.8 2x37 ER 100 - 3
ViO 38 U 20.7 3.8 2x38.6 ER 100 - 3
ViO 45 22.6 4.4 72 ER 100 - 3
ViO 55 27.9 5.1 77 ER 100 - 4
ViO 50 U 29.5 4.7 2x40.3 ER 100 - 4
ViO 57 U 29.5 5.3 2x40.3 ER 100 - 4
B 55 W-1 40.3 5.5 61 ER 100 - 2
B 55 W8-1 40.3 5.9 61 ER 100 - 2
ViO 80-1 40.7 8.1 2x70.3 ER 250 - 3
B 7-5 B 41.5 8.0 2x74 ER 250 3 4
ViO 75 43.4 7.7 112 ER 250 - 3
B 7 Sigma 43.4 8.0 112 ER 250 - 3
SV 100-2 54.3 9.8 2x77.7 ER 250 3 4
SV 100 54.8 9.2 128 ER 250 - 4

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.