Pel-Job Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
EB 12.4 11.4 1.5   ER 50 - 2
EB 14.4 11.4 1.5   ER 50 - 2
EB 16.4 12.9 1.7   ER 50 - 2
Sirius Plus 14 1.4 32 ER 50 - 2
EB 150 14 1.6 16 + 16 + 11 ER 50 - 2
EB 200 14 1.8 21.5 + 21.5 + 14 ER 50 - 3
EB 25.4 20 2.6 2x22 ER 50 - 3
EB 250 20 2.8 2x21.3 ER 50 - 4
EB 30.4 20 3.0 2x25 ER 50 - 4
EB 300 20 3.1 2x23.3 ER 50 - 4
EB 306 20 3.2 65 ER 100 1 -
EB 350 27.2 3.5 90.2 ER 100 - 3
EB 406 27.2 3.7 70 ER 100 - 3
EB 450 31 4.4 99 ER 100 - 4
EB 506 36.8 5.0 102.5 ER 100 - 4
        ER 250 - 3
EB 706 41.2 7.5 160 ER 250 - 4

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.