Brøyt Excavators

The table below shows drum cutters and motor sizes recommended for each excavator, depending on whether one or two pump flow is available.
Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
  kW t l/min ER series One pump
flow
Double pump
flow

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.

Model Engine
power
Operating
weight
Oil flow Recom.
cutter
Recom. motor
displacement
Recom. motor
displacement
ED 600 W 158 42.9 2x356 ER 2000 2 3
        ER 3000 1 3
ED 600 T 158 47.5 2x356 ER 2000 2 3
        ER 3000 1 3
D 600 W 255 41.9 2x356 ER 2000 2 3
        ER 3000 1 3
D 600 T 255 46.5 2x356 ER 2000 2 3
        ER 3000 1 3
D 800 W 255 52.5 2x356 ER 2000 2 3
        ER 3000 1 3
D 800 T 255 61.2 2x356 ER 3000 1 3
ED 800 T 255 62.7 2x356 ER 3000 1 3
ED 800 W 255 62.8 2x356 ER 3000 2 3
D 1000 W 265 55.5 2x480 ER 3000 3 3
        ER 5500 - 2
ED 1000 W 275 56.6 2x480 ER 3000 3 3
        ER 5500 - 2
D 1000 T 275 64.2 2x480 ER 3000 3 3
        ER 5500 - 2
ED 1000 T 275 65.3 2x480 ER 3000 3 3
        ER 5500 - 2

Double pump flow is not always available on excavators as standard.  In some cases, modifications are required to obtain double pump flow.  If you are unsure of the hydraulic flow available, contact your local excavator dealer.

Erkat cannot guarantee that the information contained on this page is correct or be held responsible for the consequences of any actions that may arise through the use of this information.